IS-20A Wall-mount Sensor

IS-20AWall-mount Sensor

Features

The IS-20A Wall-Mounted Sensor is a high-sensitivity infrared sensing device suitable for various applications. This sensor features a wide operating range and high-precision signal reception capability, significantly enhancing equipment operational efficiency. The IS-20A is equipped with a red LED indicator and an RCA interface, making it easy to install and an ideal accessory for infrared microphone systems.

Model	IS-20A
Frequency	2.08MHz & 2.54MHz
Operating range	20M line-of-sight (typical)
Signal/Power interface	RCA-female jack
IR LED	4.8mm semi-lens photodiode / 10pcs
Power indicator	Red
Reception area	240 m² (typical with receiver)
Reception angle	Horizontal: 70°, vertical: 60°
Dimensions (mm)	50.5 x 136 x 50.5
Weight (g)	143
Material	PC

Popular Questons

How to avoid or reduce feedback?

Position the microphone over 3 meters from the speaker and avoid pointing it at the speaker. Place the amplifier on a tripod, between the speaker and the audience, facing the crowd....more
How to extend the operating distance of wireless amplifiers?

Install a repeater transmitter on the wireless amplifier and a receiver on the powered speaker, both set to the same frequency, allowing one amplifier to connect with multiple speakers....more
What are the common causes of dropouts?

Common causes of dropouts include improper installation of the antenna, environmental interference and interference from the surrounding audio equipment....more
Where are Wireless XLRang Microphone System suitable? How many wireless microphones can be used?

The system covers up to 300 x 300 square meters, ideal for sports venues, campuses, and malls, and includes two wireless microphones....more
What should I notice during GM-243 conference system installation?

Do not power on during installation to avoid equipment damage from short circuits caused by poor-quality cables. Use CHIAYO or certified Cat.5e/Cat.6 network cables, and avoid unknown cables....more

See more questions...