ST-51AWind-up tripod stand

for STAGE series

Features

The ST-51A hand-crank tripod stand, suitable for the STAGE series, is a robust aluminum alloy stand. The upper tube diameter is 3.5cm, and the lower tube diameter is 4.2cm, offering excellent stability and load capacity, supporting up to 60kg. The height can be adjusted from 125cm to 195cm using the hand-crank mechanism and locking knob, ensuring equipment stability. Weighing 6.88kg, it is easy to transport and install, making it an ideal accessory for various audio equipment.

Model	ST-51A
Parts	Tripod stand (ST-51) + adaptor (1XA2075)
Material	ferroalloy
Tube diameter (cm)	Telescoping tube: 3.5; center tube: 4.2; leg: 3.8
Hight adjustment	Hand crank + locking knob
Height (cm)	125 ~ 195
Load capacity (Kg)	60
Weight (Kg)	6.88

Popular Questons

How to avoid or reduce feedback?

Position the microphone over 3 meters from the speaker and avoid pointing it at the speaker. Place the amplifier on a tripod, between the speaker and the audience, facing the crowd....more
How to extend the operating distance of wireless amplifiers?

Install a repeater transmitter on the wireless amplifier and a receiver on the powered speaker, both set to the same frequency, allowing one amplifier to connect with multiple speakers....more
What are the common causes of dropouts?

Common causes of dropouts include improper installation of the antenna, environmental interference and interference from the surrounding audio equipment....more
Where are Wireless XLRang Microphone System suitable? How many wireless microphones can be used?

The system covers up to 300 x 300 square meters, ideal for sports venues, campuses, and malls, and includes two wireless microphones....more
What should I notice during GM-243 conference system installation?

Do not power on during installation to avoid equipment damage from short circuits caused by poor-quality cables. Use CHIAYO or certified Cat.5e/Cat.6 network cables, and avoid unknown cables....more

See more questions...